. . . the highest quality!
     . . . the best value!
A-Flame       
Merlyn   Corporation

8175 Kroger Farm Road
Cincinnati, Ohio USA
Tel  513-831-4284
Fax  513-831-5237
Questions?
E-Mail merlyncorp@gmail.com
Most Brochures are in WORD format. 
To obtain a WORD viewer,  click here:
http://www.microsoft.com/en-us/download/details.aspx?id=4

ArcMaster 8830 Twin-Wire Arc Spray System
Your best value in a production twin-wire arc spray system; hand held or machine mount.
See Our Inventory of USED filtration systems
Leasing Calculator Why Lease?
Ask about our Automatic Work Positioners!

To open the brochure, click here
  We stock the highest quality, interchangeable Replacement Parts for several manufacturers' systems;  parts such as:  water cooled power cables, nozzles, electrodes, torch bodies, powder ports, insulator assemblies, gears, rollers, 0-rings, seal kits, and many thousands of other parts for wire, flame-spray, and plasma systems. 

See our used Equipment section.
Go To Used Equipment
Download Parts Price List
Download Chiller Brochure!
Water Chillers!
...for any manufacturing cooling application!
Questions?   E-Mail:  merlyncorp@gmail.com
don’t scrap the old plasma system!...

Make it new again, and much more accurate, by converting your 7MC to a 9MC system!

Send us an e-mail; or, give us a call!

Tel 1(513)831-4284   Fax 1(513)831-5237 

E-Mail:  merlyncorp@gmail.com

       
For Details
Click for Brochure on this 4-32 Filtration System!
AP5-II Powder Flame Spray System
    The AP5-II gun will handle metal, ceramic, cermet and exothermic powders.  It will produce coatings, with these powders, as fast as any other comparable flame spray gun.  The deposit efficiencies are very high.
Only a small amount of the powder is lost by being blown away, or vaporized.  Another advantage is the density of the sprayed coatings, which permits better finishes, and less final finishing.
The type AP5-II will efficiently spray coatings, which are later fused, or coatings used “as-is”.  Also, the gas head construction makes the gun resistant to backfire.
The AP5-II is designed primarily for hand-held operation; but, it is also suitable for production use.  A rugged tool post fixture is supplied with each gun, to permit mounting on a lathe, or other traversing mechanism.

Velocity Master 5000
Controller
AP5000 Torch
CAPABILITIES:  This system is more versatile for metallic and carbide coatings, which provide resistance to erosion, abrasion, sliding, fretting wear, & thermal exposure.

The AP-5000 is a high-pressure, high velocity, liquid fuel system that develops a combustion chamber pressure up to 120-psi (8.27 bar). 

The fuel and oxygen are mixed and atomized after passing through an orifice into the combustion chamber creating a stable, clean, uniform combustion flame.